Lap-Sharp® Optional Accessories

Accessory Name
Suggested List

500-1000-001 The H-100 Honing Guide use with or without the Lap-Sharp Sharpening System: Great at holding narrow chisels. The H-100 Honing Guide can hold from a 1/8” (3mm) chisel to a #8 (2 5/8”) plane iron.

Lap-Sharp Option

 $149.95

500-0400-013A 10mm Tool Bar/Honing Guide Mounting Kit*: This assembly is standard on the LS-200-2009 model and is available as an upgrade kit for earlier models of the Lap-Sharp. It enables the bevel sharpening of shorter tools such as butt chisels and is required for the mounting of the optional H-100 Honing Guide. It also supports the use of the optional 1” version 2 tool bar.

Lap-Sharp Option

 $56.95

500-0400-003 Tool Bar Version 2 - Assembly**: Support bar for sharpening the bevel edge of chisels and plane irons, cabinet scrapers, turning scrapers and skews, and a variety of other tools.

Lap-Sharp Option

 $56.95

300-0700-001 Self Squaring Tool Clamp: Used with the Tool Guide Bar to hold a tool while sharpening the bevel edge. Order additional clamps for sharpening multiple tools

Lap-Sharp Option Lap-Sharp Option
$19.95

500-3000-001 Planer & Jointer Blade Jig Assembly: Sharpen planer and jointer knives with the optional jig used to hold these knives at the desired bevel angle. A very high level of sharpness can be achieved by using finer grits of abrasive than is commonly provided by commercial sharpening services. Numbers etched in the two adjusting knobs enable the user to evenly feed the knife and to repeat the setting on additional knives in the set, so an even amount of steel is removed from each knife.

Jointer Plan

Discontinued

500-2000-003 Turning & Carving Tool Jig Version 3: The turning and carving tool jig has two support bars that may be used as a free hand support arm or with the rotating tool holder to achieve a rounded bevel at the desired shape.

Gouge

Discontinued

500-1500-001 Splash Guard: The Splash Guard reduces the spatter of applied lubricant caused by the rotation of the abrasive disc. This option is also recommended for continuous lubricant applications such as when using diamond abrasive.

Splash Guard
$28.95

 

hit counter